Spiral Wound Gasket Identification

 The color of the keys on the display looks very obvious, however, it should be using the simple color wheel color system specified by ASME. Portrait screen on ring rim. The measured boundary color uses the metal outside the outer center, and the object used is displayed vertically (below). Please specify by the user, otherwise the material inside is suitable for the packaging material of the surrounding environment of ASME B16.20-2012. If there's a perimeter brand specific overwrap that surrounds the surface, it's easier to use some perimeter-colored wrapping material, making hearts and chemicals out of common materials. Not carbon steel, also printed on the ring.

Spiral Wound Gasket Constraints

The limiting factor in most cases for spiral wound gaskets is temperature. In general, it is the filler material that creates this limit.

Final Thoughts Finally, wound gaskets are still considered prior art or simple commodities. However, based on proper metallurgical selection and filler materials, it can be a very innovative engineering solution to today's modern sealing challenges. So the next time you have to replace a gasket and you are unsure or in doubt, you can also fill out the Gasket Request Data Sheet: https://www.sunwellseals.com/contact.html or E-mail us : sales@sunwellseals.com(Mr. CHEN)